Choosing a plastic cup printing ink depends on three things: the plastic type, the printing process and the product packed inside
Dry offset printing applies UV-curing ink directly onto preformed plastic cups and containers, so a separate label is not always needed
Food packaging calls for low-migration inks, but the finished package must still be assessed against the relevant requirements
Zeller+Gmelin, a German ink manufacturer, offers two UV dry offset ink series for plastic cups:
UVACURID PrimeCup C81 (low-migration, for food packaging) and UVAROLID UV
IN THIS ARTICLE
Printing designs on plastic cups is about more than looks. It also affects production quality and stability, the sharpness of the design, ink adhesion and durability during use.For cups used for drinks, ready meals, yogurt and other products in preformed containers, the wrong ink can cause print quality problems and make production harder to control
That is why choosing a plastic cup printing ink means looking at the material, the printing process and the requirements of the product inside.
Zeller+Gmelin, a German manufacturer of printing inks, offers inks made specifically for printing on preformed plastic containers. Its range covers both general packaging and formulations developed for food packaging.
Why Does Choosing the Right Plastic Cup Printing Ink Matter?
Plastic cups for the food and beverage industry can be made from several materials, such as PP, PS or PET, and each has different surface properties. When a design is printed on the cup, the ink must adhere properly and keep its quality through production, filling and use
Key factors manufacturers should consider
1. Ink adhesion to the plastic surface
Every plastic has a different surface, especially PP and PE, which may need surface treatment before printing. Poor adhesion can lead to ink flaking or uneven print quality. Always test the ink on the actual material and under real production conditions before use
2. Sharpness and color consistency
Cups with logos, small text or multi-color designs need inks that deliver clear detail and stay consistent throughout the run. Pigment quality, ink formulation and press control all affect the final result
3. Durability and production efficiency
Some packaging goes through different filling, transport and storage conditions. Printing inks must suit real-world use, with a durable ink surface and reliable performance on the production line. Choosing the right ink from the start reduces quality risks and the need to adjust the process later
4. Ink misting during printing
At high press speeds, fast-turning rollers can break some of the ink into fine droplets that mist out of the inking unit. These droplets can settle on the press, the printed parts and the area around the line, and can float in the air where operators work
An ink with low misting keeps the production area cleaner, reduces contamination on parts and machines, and lowers operators’ exposure to ink mist. This is another factor to weigh alongside print quality
What Is Dry Offset Printing on Plastic Cups?
Dry offset printing is a printing process that uses UV-curing inks to print directly onto preformed plastic parts, such as cups, tubs, buckets and lids. Some manufacturers call it UV form printing or indirect letterpress
The process decorates the container surface directly, so a separate label is not always required
Inks for dry offset must suit printing on the container surface and cure under the press conditions. Key points to check:
• Suitability for the plastic type
• Adhesion quality
• Print sharpness
• Durability after printing
For food packaging, food contact material requirements must also be considered.
How Do General Cup Printing Inks Differ from Food Packaging Inks?
Both types decorate the container surface, but their requirements differ.
• General printing inks: the focus is usually on color quality, adhesion, curing and ink film durability
• Food packaging inks: must also address the risk of substances moving from the ink or other packaging components into the food (migration), as well as the relevant legal requirements
What is low-migration ink?
Low-migration ink is a printing ink formulated to reduce the chance of substances migrating from the ink under defined conditions
However, using a low-migration ink does not mean the finished package automatically meets safety requirements. Manufacturers must assess the package structure, substrate, curing conditions and type of food contact to confirm it is suitable for real use.
Zeller+Gmelin Printing Inks for Plastic Cups
Zeller+Gmelin offers inks for dry offset printing on plastic containers, each developed for different applications and requirements. Two product series to consider for printing preformed plastic containers are UVACURID PrimeCup C81 and UVAROLID UV
UVACURID PrimeCup C81: ink for food packaging
UVACURID PrimeCup C81 is a low-migration dry offset ink developed for printing food packaging. It is suitable for plastic cups, tubs, buckets and lids within the product’s scope of use
Key features according to the manufacturer:
• High color intensity: strong color that makes designs stand out on the package surface
• Very good adhesion and surface hardness: good adhesion and a hard ink surface
• Low dot gain: limits dot spread to keep text and fine detail sharp
• Very low misting: very little ink mist, even at high press speeds, which helps keep the production area clean and reduces ink mist where operators work.
In real production-line trials with the PSG team, almost no ink color was visible on operators’ face masks after printing.
The series is also highly reactive under UV light, with printing properties suited to producing preformed containers. According to its technical data sheet (TDS), UVACURID PrimeCup C81 conforms to:
• Swiss Ordinance 817.023.21
• German Ink Ordinance
• EuPIA Charter
• Nestlé Standard on Printing Inks for Food Packaging (St-80.001)
It is also BPA-NI (formulated without free bisphenol A and without bisphenol A–based raw materials) and VOC-free
The manufacturer also lists resistance to various filling materials, which should be checked against the actual application
UVAROLID UV is another option for plastic container manufacturers. Check the packed product, market requirements and technical documents before choosing it
UVACURID PrimeCup C81 vs UVAROLID UV
Tip: do not choose an ink series on color or speed alone. Start with the packaging type and the requirements of the product it will hold
• Beverage & Cosmetic Labels
• Folded Box and Flexible Packaging
• Self Adhesive Labels
• Shrink Sleeves
• Wrap-Around In Mould Labels
• Pouches and Stand-up Pouches
• Tags & Tickets
5 Things to Check Before Choosing a
Plastic Cup Printing Ink
If your plant is changing inks or developing a new print job, prepare this information first:
The plastic used for the container
• State clearly whether it is PP, PE, PS, PET or another material, and any surface treatment used before printing, such as corona or flame treatment. Both the material and the surface preparation directly affect ink adhesion.
The printing press and UV system
• Food, beverages, cosmetics or general products may have different requirements
The print properties you need
• For example, color strength, text sharpness, ink surface durability and adhesion after printing
Quality and safety requirements
• For food packaging, assess the ink formulation, materials, real-use conditions and the requirements of the destination market
Complete information makes it easier to match the ink to the needs of your production line
Are Plastic Cup Printing Inks Related to Plastic Recycling?
Yes. Beyond production quality, printing ink is one of the components to consider when designing packaging for recycling. Ink that stays on the plastic during melting can affect the color and quality of recycled pellets, which is why ink removal (de-inking) is being studied as a way to reduce ink contamination.
However, good print properties or a low-migration formulation do not mean the ink can be removed from plastic during recycling. De-inking performance must be assessed separately for each ink formulation, plastic type and recycling system
Learn more: Plastic Cup De-inking: The Path to Sustainable Recycling for Printed Cups and Labels
Plastic Cup Printing Ink FAQ
Which ink should I choose for PP and PET plastic cups?
What is UVACURID PrimeCup C81 used for?
Can UVAROLID UV be used on plastic cups?
Is low-migration ink safe for all types of food packaging?
Should I leave an unprinted area below the rim of a drinking cup?
Choose the Right Ink for Your Job: Talk to Press Systems Group
Need printing inks for plastic cups or food packaging?
The UVAFLEX® Y80 UV Flexo ink series is primarily designated for non-food applications and does not feature a specific Food Contact Material (FCM) formulation. If your printing facility requires the production of food labels or packaging subject to migration analysis under EU regulations, we highly recommend switching to the UVAFLEX® Y81 series. This specialized FCM-grade ink is explicitly developed for food packaging, ensuring maximum safety compliance and eliminating legal risks for exportThe Press Systems Group (PSG) technical team is ready to provide in-depth ink consulting to help you find the exact solution that matches your press specifications and aligns with global standards.
