Since 1996, Troika Systems (UK) has pioneered 2D and 3D scanning microscope technology, setting the standard for precision quality control across the label and packaging printing industry
Troika’s 3D scanning microscopes help press operators fine-tune machine settings faster, delivering accurate cell volume measurement, dot percentage, and plate depth readings for consistent color control and less on-press waste. This precision has helped reduce waste across the global printing industry by more than 207 million m² to date, driving a more sustainable approach to print production
Products
Troika EVO™
See Every Detail. Control Every Measurement
One Device for Complete Anilox Inspection, Measurement, and Data Management
Troika EVO™ is the latest 3D scanning microscope for print quality inspection, built with a 2.3MP high-resolution sensor and a scanning engine up to 70% faster than previous generations. It gives QC teams the precision to catch defects early, cut waste, and manage anilox inspection data plant-wide from a single system
Solving Production Problems :
• Prevents Anilox Wear: Detect wear and cell blockages before they affect production, reducing print defects and color inconsistency
• On-Press Measurement, Anywhere: Scan directly at the press with no vibration-isolation table required
• Full Traceability: Every measurement is logged systematically, so historical data is never scattered or lost
• Consistent, Reliable Results: Minimizes human error so every shift and every site reads from the same trusted data
• Standardized Accuracy: Repeatable, uniform results every cycle — no more mismatched readings between operators
Ideal For :
• Flexographic printers that need routine anilox roll inspection
• Gravure printers verifying cylinder condition before production runs
• Plate Makers, Quality Control, Printer for inspect flexo dot size and photopolymer relief depth prior to print runs, eliminating setup waste and optimizing print consistency
| Feature | Detail |
|---|---|
| Image Sensor | 2.3-megapixel resolution (1920×1200) |
| Scan Speed | Up to ~70% faster than previous generations |
| Vibration Management | Advanced compensation software cancels vibration interference for accurate, |
| instant on-press readings. No isolation table needed | |
| Connectivity | USB-C / USB 3.1, powered directly from a laptop, lightweight and ready to |
| use anywhere on the press floor | |
| Lens System | Precision-locked positioning maintains consistent focal distance and |
| viewing angle every time | |
| Legacy Compatibility | Legacy Mode keeps readings consistent with older Troika devices and other |
| brands, for seamless historical comparison | |
| Included Software | Anilox QC, Gravure QC, Flexo QC, Ra/Rz Surface Roughness QC, |
| Included Software | Anilox QC, Gravure QC, Flexo QC, Ra/Rz Surface Roughness QC, |
| Troika Management System™ (TMS) | |
| Warranty & Support | Up to 3-year device warranty*, plus training and support |
Troika EVO™
Measure Anywhere, Even Hard-to-Reach Areas .
High-speed magnetic mounting for instant on-press measurement, no roll removal required
Troika EVO-M™ is a portable inspection device for Anilox Rolls and Gravure Cylinders, built with a factory-fitted quick-release magnetic mount for instant on-press measurement, no roll removal needed. It supports cylinders from 100mm in diameter and up, matching Troika EVO™ for accuracy with the same 2.3MP sensor and scan speed
| Feature | Detail |
|---|---|
| Mounting System | Built-in quick-release magnetic mount, secures firmly to anilox and gravure |
| cylinders from 100mm and up — measures accurately even upside-down | |
| Image Sensor | 2.3-megapixel resolution (1920×1200) |
| Scan Speed | Matches Troika EVO™ |
| Vibration Management | Advanced compensation software cancels vibration interference for |
| accurate, instant on-press readings. No isolation table needed | |
| Connectivity | USB-C / USB 3.1, powered directly from a laptop, lightweight and ready |
| to use anywhere on the press floor | |
| Data Management | Troika Management System™ (TMS) stores, analyzes, and manages |
| measurement data from every press and roll size, with unlimited historical lookup | |
| Included Software | Anilox QC, Gravure QC, Embossing QC, Troika Management System™ (TMS) |
| Warranty & Support | Up to 3-year device warranty*, plus full training and support |
Solving Production Problems :
• Skip the Roll Removal: Measure anilox and gravure cylinders directly on press, with zero disassembly downtime
• Reach Tight Spaces: Access confined mounting positions other devices can't
• Accurate at Any Angle: Delivers precise readings even in inverted or hard-to-reach positions
Ideal For :
• Inspecting anilox and gravure cylinders while still mounted in the press
• Print shops looking to cut press downtime from roll removal and reinstallation
• Fast inspection checks during press setup and changeovers
Troika EVO™
Low-Screen Anilox and Embossing Die Measurement, Powered by PIXELOC™ Technology
SurfaceCAM HD™ specializes in low-screen anilox rolls, coating roll (10–70 L/cm / 24–180 lpi), and embossing dies. It delivers detailed 3D analysis of cell volume, relief depth, and engraving geometry with unmatched repeatability
Solving Production Problems :
• Covers Every Roll Type: Handles low-screen Anilox Rolls, Coating Rolls, and Embossing Rolls in a single device
• Cuts Re-Engraving Costs: Catches engraving defects before the roll ever reaches the press
• 3D Cell Analysis: Clear, consistent measurement of depth, cell volume, and surface finish on embossed and relief structures
Ideal For :
• Anilox roll and gravure cylinder manufacturers
• Label & Packaging printers working primarily with low-screen anilox rolls
• Embossing operations requiring detailed quality control
| Feature | Detail |
|---|---|
| Low-Screen Anilox Measurement | Measures low-resolution anilox in the 10–70 lpcm (24–180 lpi) range |
| Engraving & Embossing Analysis | Analyzes depth, relief geometry, and structure of engraved or embossed |
| surfaces for precise quality control | |
| Technology | PIXELOC™ — Troika Systems' proprietary closed-loop feedback system |
| for maximum measurement accuracy | |
| Vibration Management | Advanced compensation software cancels vibration interference for |
| accurate, instant readings. No isolation table needed | |
| Data Management | Troika Management System™ (TMS) stores, analyzes, and manages |
| measurement data from every press and roll size, with unlimited historical lookup | |
| Included Software | Anilox QC, Gravure QC, Embossing QC, |
| Troika Management System™ (TMS) | |
| Upgrade Option | Optional magnetic-leg upgrade enables instant on-press measurement of |
| anilox and coating rolls, with no need to remove them from the machine | |
| Warranty & Support | Up to 3-year device warranty*, plus training and support |
Comprehensive on-press measurement coverage across every print surface:
Anilox Rolls
Measure cell volume, depth, and cell opening size, while detecting ink blockages or roller wear — for both flexographic presses and Gravure coating units
Gravure Cylinders
Gravure Cylinders: Measure cell volume, depth, and cell wall condition to evaluate ink transfer quality and predict cylinder service life
Photopolymer Flexo Plates
Photopolymer Flexo Plates: Measure dot height, dot percentage, dot base angle, and plate floor depth to catch blurring, dot gain, and ink flooding issues as early as pre-press
QC Analysis Software
Press Systems Group delivers more than hardware, every Troika device we supply comes with a full QC analysis software suite, backed by our Thai-based team for installation and hands-on training, so your investment performs at full capacity from day one.
Anilox QCAnilox Roll Quality Control
Anilox QC inspects anilox roll condition: cell volume, depth, cell wall thickness, and screen resolution with side-by-side comparison imaging to plan cleaning or maintenance ahead of time. It reduces wear, cuts waste, speeds up press setup, and keeps print sharpness consistent across every shift
Gravure QCGravure Cylinder Quality Control
Gravure QC inspects Gravure Cylinders, analyzing cell volume, depth, and cell structure for both diamond-stylus and laser-engraved cylinders. It compares before-and-after maintenance condition, detects wear early, and supports proactive cylinder replacement planning to keep print quality sharp and consistent
Flexoplate QCFlexo Plate Quality Control
Flexoplate QC delivers 3D measurement of flexo plates, precisely capturing dot structure, depth, and dot angle, with impression-simulation to verify print readiness and predictable press performance. It shortens setup time, prevents on-press waste, and keeps print quality stable across every production run
Ra/Rz Surface Roughness Surface Roughness Control
This module analyzes surface roughness using Ra (average roughness) and Rz (mean roughness depth) through high-resolution 3D scanning of anilox rolls and gravure cylinders — verifying surface quality and consistent ink transfer performance.
Troika Management System™ (TMS) Centralized Data Management for Anilox and Gravure Assets
TMS is a centralized database for your anilox roll and gravure cylinder fleet, syncing scan data in real time to track wear, cell volume history, and cleaning cycles. It enables precise maintenance planning and gives you complete historical visibility in a single system.
Trade-In
Trade In Your Old Device — Upgrade to Troika EVO™ with an Exclusive Discount
Trade in your existing anilox inspection device in any condition for an upgrade to the latest Troika EVO™. The entire process is handled end-to-end by Press Systems Group, the sole authorized Troika Systems distributor in Thailand
Your Current Device:
Upgrade To:
Any AniCAM Model or
Other Brand of Inspection Device
• AniCAM V7.3, HD™, and HD™ Plus: Accepted in any condition, regardless of age — even damaged or non-functioning units
• Other Brands Welcome: We also accept anilox, gravure, and flexo plate inspection devices from other manufacturers just share the brand and serial number for an instant preliminary valuation
Troika EVO™ with an
Exclusive Trade-In Discount
• New 2.3MP High-Resolution Sensor (1920×1200): Backed by the full software suite and the Troika Management System™ (TMS) database
• Complete Accessory Kit: Includes hands-on training for your press floor team
Certified Refurbished
A budget-friendly option for print shops looking to start anilox inspection and quality control. Every unit is factory-inspected and refurbished directly by the manufacturer, not an unknown-history device from the open second-hand market
Where Our Refurbished Devices Come From
Older devices traded in through our Trade-In Program (see above) are returned to Troika Systems for full inspection and refurbishment before being resold at a fraction of the cost of a new unit.
Factory-Certified Refurbishment:
Inspected and reconditioned directly by Troika Systems — a level of assurance you won't get from the general second-hand market
Lower Cost of Entry:
Ideal for smaller print shops building their first formal QC process, or as a backup/second unit for an existing site
Compatible Software:
Works with core Anilox QC inspection software, according to each model's original specifications